Stopper for the window lifter arm (1 piece)
This stop limits the travel of the window lifter arm when closing the door. In addition, the height of the closed window can be adjusted by moving the holder for the upper position. This height can be adjusted within a certain range, but as soon as the stops are too worn or pressed in by the FH arm, the adjustment option is no longer sufficient, which means that the door becomes increasingly difficult to open when the window is closed, as the door body is pressed more and more forcefully into the latch of the lock by the window (as the height of the end position increases).
This window lifter stop is an original part from the original manufacturer and is not a reproduction part made from a different material, for example. Due to their material properties, they also ensure optimum impact and noise damping.
Note:
The stops for the lower position of the side window can be made from this part yourself using a milling machine by milling this stop into the required shape. You can also order the stops from me as a complete set. As I also mill the stops for the lower window position by hand from these parts, they are unfortunately correspondingly expensive, but they are made from the same material as the original parts.
No annoying reworking is necessary due to poor dimensional accuracy. In addition, these stops (like the original parts) can be rotated, so they do not have a fixed installation position and can be installed rotated once to extend the service life, as the FH arm is not centred on the stop, it only presses together on one half ;-)
